FREE SHIPPING ON ALL BUSHNELL PRODUCTS

LZT08 Series LED Garden light

Short Description:

IP66 waterproof/dust proof/explosion proof/IK09
Aluminum shape good at heat dissipation  It can also be installed vertically
Philips SMD 3030/ 5050/ Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Excellent post light control design, the whole lamp can achieve T II-M, T  III-M,That’s our advantage
Pass 3G vibration test


Product Detail

Product Tags

SLT08 Series LED Garden light

Matters needing attention

Before installing the lighting fixtures, please read this instruction manual carefully.

The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.

Lamps should always be installed or replaced carefully.

Please check the local voltage in accordance with the product requirements before installation.

Revamping only can be done when the power is off and the lamp is completely cooled down.

When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.

Don’t cover the fixtures with flammable materials.

Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.

Temperature Characteristics T-ambient 25℃

Temperature
Operating -20~+55℃ Storage -40~+60℃

Electrical Characteristics

Input Voltage: AC100-240V
50/60Hz PF: >0.9
Power Efficiency: ≧0.90

Features

IP66 waterproof/dust proof/explosion proof/IK09
Aluminum shape good at heat dissipation It can also be installed vertically
Philips SMD 3030/ 5050/ Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage
Pass 3G vibration test

Application

It is mainly applied to branch road, factory, school, garden, various residential communities and courtyards. The installation height is 4-10m and the installation torque is 16Nm.

Product Dimension

01

T08-15G

01

T08-15L

01

T08-15D

01

T08-110G

01

T08-110L

01

T08-110D

 

Parameter

(lm/W)
T08-15-30W 30 3030 64 4 4000k 130 >70
T08-15-40W 40 3030 64 4 4000k 130 >70
T08-15-50W 50 3030 64 4 4000k 120 >70
T08-15-60W 60 5050 32 4 4000k 130 >70
T08-110-80W 80 3030 108 9 4000k 130 >70
T08-110-100W 100 3030 144 9 4000k 130 >70
T08-110-120W 120 3030 144 9 4000k 120 >70
T08-110-150W 150 5050 72 9 4000k 130 >70

Erp Technical Specification

Item Symbol specification/Data
Color Index CRI Ra>70
Luminous Efficacy lm/W 120--140 lm/W
Energy efficiency Class / A++
Color consistency in level / Max.6SDCM
THD / <15%
Starting Time S <0.5S
Switching cycle before failure / >100,000times
Premature failure rate@1000h / 0
Lifespan H >50000Hrs

Light distribution curve selection


120°


113°X 97°


T1


T II-M


T III-M


T IV-M


T V


T II-BLS

Multiple Light Distribution Options
Street light should fit with a wide range of applications, such as highway, express way, roadway, avenue, walking  path or parking lot lightings. Considering this, SUNLE provides different light distribuTIon lens for theT08 Series  street light to achieve best lighting effect in different applications. SUNLE follows the North American IESNA  standard in providing the optional lens width ,TypeI, Type II ,Type III and Type V.
Type I is suitable for walking path with 1 lane, Type II is for 2 lanes and Type III is for even more wider road, Type  V is for parking lot.
SUNLE selects the most suitable lens for its customers according to the detailed parameters project by project.

TYPE I
The Type I lens of sunle R06 series street light. In the IESNA Standard, The Type I distribution is great for lighting walkways, paths and sidewalks. It is generally applicable to where the mounting height is approximately equal to the roadway width.

TYPE II
The Type II lens of sunle R06 series street light. In the IESNA Standard,  the Type II distribution is used for wide walkways, on ramps and  entrance roadways, as well as other long, narrow lighting. It is generally  applicable to where the width of the roadway does not exceed 1.75 □  mes the designed mounting height.

TYPEII BLS
The Type II BLS is a new light distribution developed based on  Type II.
BLS means back light shield. The light on the back of pole be  reduced and the light in front of the pole be increased  accordingly. It is generally applicable to where no need or need  less light on the back of pole, such as residential area, high way,  bridge and etc.

TYPE III
The Type III lens of sunle R06 series street light . In the IESNA Standard,  the Type III distribution is meant for roadway lighting, general parking  areas and other areas where a larger area of lighting is required. This  distribution is intended for luminaires mounted at or near the side of  medium width roadways or areas, where the width of the roadway or area  does not exceed 2.75 times the mounting height.

TYPE V
The Type V lens of sunle R06 series street light . In the IESNA  Standard,It is intended for luminaire mounting at or near center of  roadways, center islands of parkway, and intersections. It is also meant  for large, commercial parking lot lighting as well as areas where suticient,  evenly distributed light is necessary.

Installation way

Installing steps

Turn off the power before installing
Make sure the model, rated voltage and wattage are the same with the design parameters
Check the wire specification ,
Connect the wire,Through the waterproof connector, connect the L/N wire of the street lamp to L/N wire of the city electricity.

1.Put the light into the light stem 2.Fix the screw of handle
3.check the installing of the light whether level or not . 4.Adjust the angle into which needed
5. Check the the handle screw fixed or not, if loose, should make it tightly, torque is 16NM

Attention

This specification is for reference only,we reserve the right to change without notice.


  • Previous:
  • Next:

  • Write your message here and send it to us